Rubber Based PSA Hot Melt Adhesive High Bonding Strength 16 Tons / Container
SPECIFICATIONS
| Material | Synthetic polymer resin | | Appearance | Light transparent block | | Soften Point | 80±5°C (GB/T15332-1994) | | Viscosity(180°C) | 2000±500mpa·s (HG/T3660-1999) | | Peeling Strength(180°) | ≥30N/2.5cm (GB/T2790-1995) | | Valid Time | 12 months(indoor, unexposed to the sunlight, not more than 40 degree) | |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The material can be stored indoor for 12 months, from the date of manufacture, in its original packages under
dry and clean conditions at ambient temperature below 350C and above 50C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Ap
Properties:
Construction glue, mainly for structural purpose of sanitary products such as diapers, sanitary napkins, etc.
Hot Melt Pressure Sensitive based Hot Melts are tacky to the touch at room temperature and are widely used in the labeling industry. These hot melts are also commonly used in tape manufacturing, diaper, feminine hygiene and bottling industries.
Advantage:
1. Own factory, imported raw materials
2. Own lab, R&D team, customized products available
3. OEM/ODM available
4. Free samples
5. Agent supported
Product Tags:
|
|
Rubber Based PSA Hot Melt Adhesive High Bonding Strength 16 Tons / Container Images
|
